WiFi Enabled LTE Small Cell Gateway Market to Register a Strong Growth By 2021 – PMR

On paper, connecting walkie talkie radios to a Wifi networkis is the most obvious method of controlling and communicating within a business. But the reality is that there aren’t many radios on the market that have the capability to do this and many wifi networks aren’t robust enough to manage lots of radios, this article predicts that this technology will be a growth market, we will wait and see.

WiFi enabled LTE small cell gateway is a type of a base station. Base station uses cellular wireless network for communicating with mobile phones or terminals. Base station connects mobile phones to a wireless carrier network and offers local coverage for a wireless network. The area of coverage varies from several miles to few city blocks. Each base station is typically owned by one carrier or wireless company and gives coverage only for that company’s network. It may also offer roaming coverage for other networks in case carriers have agreement for roaming and technology is compatible. Base station comprises of an electronic cabinet which connected by means of cables to a group of antennas. The antennas may be mounted on an existing structure or on dedicated tower structure including top of a building, church steeple or smoke-stack and water tower.

In radio communications, base station refers to wireless communications station implemented at a fixed location and used to communicate as wireless telephone system including cellular GSM or CDMA cell site, part push-to-talk two-way radio system, terrestrial trunked radio and two-way radio. A single location often operates several base stations owned by a different carrier. Smaller types of base stations or small cells include picocells, femtocells and microcells. WiFi enabled LTE small cell gateway is promising network element. A wide variety of base station deployments are in a small cell configuration. It has WiFi interface at end-use device and LTE interface at the carrier network.

Small cell is low-powered radio access nodes (operator-controlled) that operate in carrier-grade Wi-Fi (unlicensed) and licensed spectrum. Small cells normally have a range from 10 to numerous hundred meters. Small cell base stations are expected to play vital role in expanding the capacity of wireless networks due to increasing mobile data traffic. Mobile operators are increasingly looking forward to this technology in order to meet the rising demands for data, video and application access generated due to smart phones and other devices. Small cells aid mobile service that detect presence, interact wand connect with existing networks. Small cells offer increased quality of service and flexibility at an affordable cost. Small cell infrastructure implantation is an environmentally friendly approach as it reduces the number of cell towers and offers a cleaner signal using less power.

Rising numbers of wireless carriers or companies are taking dedicated interest in this industry owing to the proliferation of embedded WiFi features in fixed and mobile devices. Growing demand for more advanced handheld devices such as smart-phones and tablets is expected to create demand for technologies with high internet speed. This in turn, is expected to drive the growth of WiFi enabled LTE small cell gateways.

Offering workers hearing protection options

Much Like Protecting your sight or looking after your health, your hearing should also be protected, this article tackles hearing protection within the workplace and what type of earplugs are best, Enjoy.

OSHA regulations dictate we offer a “variety” of hearing protectors to noise-exposed workers. What is best practice for providing a variety while keeping inventory to a minimum?

Per CFR 1910.95(i)(3), “Employees shall be given the opportunity to select their hearing protectors from a variety of suitable hearing protectors provided by the employer.” But does “variety of suitable hearing protectors” mean two or 10, earplugs or earmuffs, different colors or different sizes?

The wrong approach is to choose a variety based on factors that have no effect on protecting hearing, including the published noise reduction rating. Some safety managers offer several different large foam earplugs that are yellow, green and orange – mistakenly assuming they meet the “variety” requirement and not realizing that a significant portion of their workforce will never achieve an adequate fit with a large foam earplug. In those cases, their supposed “variety” actually limits the number of workers adequately protected.

This bad assumption is often codified into company safety policies that require a minimum NRR: “Approved hearing protectors must have an NRR of at least 32 decibels,” or similar criteria. By definition, that typically means a large foam earplug. Despite the higher NRR based on 10 laboratory test subjects, workers with smaller ear canals will never achieve an adequate fit with those large foam earplugs to stop noise-induced hearing loss.

What are the factors that affect good fit of an earplug?

  • Size: Like a cork in a bottle, an earplug that is too large or too small will never achieve an acoustic seal to protect hearing. Offering a variety of sizes significantly improves the percentage of employees obtaining a good fit.
  • Shape: Ear canal openings may appear round, oval or slit. A foam earplug often fills an oval or slit opening better than pre-molded earplugs.
  • Ease of insertion: Some workers have difficulty rolling or inserting foam earplugs due to lack of mobility. For these workers, an earplug with a stem may be easier to insert.

Based on thousands of fit tests administered to workers in the field, the following four earplug styles provide a selection that would adequately protect nearly every worker:

  • Large foam earplug
  • Smaller foam earplug
  • Large reusable earplug
  • Smaller reusable earplug

The good news is that offering a variety does not necessarily increase cost. Buying 1,000 earplugs of one style or 250 earplugs of four different styles is fairly equivalent in cost. But the bigger variety significantly increases the probability that more workers will be adequately protected.

Many worksites adjust their inventory based on results of their fit-testing of hearing protectors. By reviewing which earplugs repeatedly provide the best fit, these companies identify the gaps or duplications in their offering and can adjust accordingly. Sometimes, this means adding a smaller-size earplug, but many times companies find they can remove some less-effective earplugs from their inventory. It’s not necessary to carry a dozen different earplug styles.

Finally, any offering of hearing protection needs a hands-on training component. How can a workers determine whether their ear canal is large or small, round or oval? It’s impossible to view your own ear canal opening in a mirror. A quick glance by a safety trainer can be of tremendous benefit in helping workers select the right earplug the first time.

MIT’s new method of radio transmission could one day make wireless VR a reality

VR is the Buzz word for this year, every technology company clambering to get their headset out on to the market. Much of the market needs to catch-up though, the power of home computing needs to improve and removing the inevitable extra cabling and wires that come with current headsets. Luckily this article is about the future technology of VR headsets, see what we can expect as this technology grows.

If you want to use one of today’s major VR headsets, whether the Oculus Rift, the HTC Vive, or the PS VR, you have to accept the fact that there will be an illusion-shattering cable that tethers you to the small supercomputer that’s powering your virtual world.

But researchers from MIT’s Computer Science and Artificial Intelligence Laboratory (CSAIL) may have a solution in MoVr, a wireless virtual reality system. Instead of using Wi-Fi or Bluetooth to transmit data, the research team’s MoVR system uses high-frequency millimeter wave radio to stream data from a computer to a headset wirelessly at dramatically faster speeds than traditional technology.

There have been a variety of approaches to solving this problem already. Smartphone-based headsets such as Google’s Daydream View and Samsung’s Gear VR allow for untethered VR by simply offloading the computational work directly to a phone inside the headset. Or the entire idea of VR backpacks, which allow for a more mobile VR experience by building a computer that’s more easily carried. But there are still a lot of limitations to either of these solutions.

THE MOVR PROTOTYPE SIDESTEPS TETHERED VR ISSUES

Latency is the whole reason a wireless solution hasn’t worked so far. VR is especially latency-sensitive, along with the huge bandwidth requirements that VR needs to display the level of high-resolution video required for virtual reality to work. But the MIT team claims that the millimeter wave signals can transmit fast enough to make a wireless VR headset feasible.

The issue with using millimeter wave technology is that the signal needs a direct line of sight, and fares poorly when it encounters any obstacles. MoVR gets around this by working as a programmable mirror that can direct the direction of the signal to the headset even while it’s moving to always make sure the signal is transmitting directly to the headset’s receivers.

For now, the MoVR is simply a prototype, with the team hoping to further shrink down the system to allow for multiple wireless headsets in one room without encountering signal interference. But even as a proof-of-concept, it’s an interesting perspective on how virtual reality could one day work.

How Many Walkie-Talkies Can Operate on the Same Channel?

Theoretically, you can use an unlimited amount of walkie-talkies on the same channel (although in practice you might experience a few problems if you took that suggestion literally). Basically, there isn’t really a set limit. You could use as many as you like provided they are set up correctly. Anybody set to the right channel and in range at the time of transmission would then be able to pick up the signal and respond to it.

Most radios have access to 8 channels. These channels each have 38 separate ‘identification tones’. The user sets his/her channel up with the desired tone and then only other users who know the channel/tone will be able to hear the transmissions. As a result, there are, in any given area, about 304 different combinations, so signal interference is unlikely to affect you.

Please do not interpret this answer as saying that your radio has access to 304 possible channels. It does not. It will likely only have access to 8. Some less reputable manufacturers tend to falsely imply access to 304 channels; this is simply not the case. You will have access to 304 possible tone/channel combinations, that’s all.

To better explain the CTCSS codes and how they work; we’ll include a little information from Amherst.co.uk’s FAQ page.

“CTCSS stands for “Continuous Tone Coded Squelch System”. These codes are also often called “Privacy codes” If a CTCSS tone is selected; a CTCSS sub-audible tone is transmitted along with the regular voice audio by the transmitting radio. The receiving radio, set to the same CTCSS tone, will only receive audio if it contains that sub-tone. Interference from other users on the same frequency is therefore rejected (unless they are also on the same sub-tone). This is a way of allowing groups of users of walkie-talkies on the same channel to avoid hearing messages from other nearby users”.

So, in conclusion, you can probably use as many walkie-talkies as you like on the same channel. As long as the units in question are of the same type (either VHF or UHF) and have the same CTCSS setup, then you simply shouldn’t have a problem. You also shouldn’t suffer from signal interference due to other users (although you may still experience signal loss/interference/degradation from other sources). We have talked about combating signal loss elsewhere, so please see the other questions if you have any problems in this area.

AXUM: THE FUTURE OF WIRELESS AUDIO

This article is the transcript of an interview with Igal Golva, CEO of Axum earphones, wireless earphones with secure fittings, designed for people doing exercise. A really interesting article about why these earphones are different to others on the market and what their plans are for the future of the company.

Mobile audio has always been a difficult balancing act. The need for great audio on the go has never been more prevalent. With smartphones now a staple for most people’s daily commute, exercise and fitness, the need for an audio solution that can be portable while still sounding good is the holy grail.

Apple, with the iPhone 7 has also forced people’s hands. The headphones they used to use are no longer as easy to pull out and plug in without the use of a dongle. This is where Bluetooth audio options come into play, and where the Axum wireless headphones are planning to make a splash. Currently on Indiegogo, the Axum are aiming to give people great audio, while ensuring they maintain that mobile, ultraportable feel. Currently at 528% funded, the Axum is proving to be a product many people want to get their hands on. We had a chance to talk to Igal Golvan, CEO at Axum, about what the headphones can do for audio and fitness and how they hope to change the way people view Bluetooth audio.

Axum: The Future of Wireless Audio 1

CGMagazine: Could you tell us a little about what Axum does and how these new headphones stand above the competition?

Igal Golvan: First of all, we not only offer four hours playtime (while others offer 1.5-2 hours) you can also get an additional four with the portable charging case. We achieved it by eliminating any unnecessary features. We are aiming to reach fitness junkies like us that need three things: fit, sound and battery life.

Our designers made a unique design that will fit you during the most extreme sport activities. In the last months all we did was test the earphones in every sport activity you can imagine .This included cycling, running, CrossFit , snowboarding and even sky diving .

The issue with True Wireless Earbuds is that all our competitors see this product as the latest technology in the headphones industry and as such they’ve aimed the technology at early adopters. Unlike them we understand the real potential of the product to become the mainstream earbuds of athletes, as the lack of cables is something so comfortable no one can even imagine, only when doing sport activities and listening to Axum earphones will you really understand the definition of freedom!

Axum: The Future of Wireless Audio 2

CGM: Could you go over what M-voiD® sound technology brings to the table?

IG: Sure. M-voiD stands for Multidisciplinary virtually optimized industrial Design. It’s a technology for the realistic simulation of audio systems using CAD data. It is a sophisticated technology that paves the way to reproduce outstanding sound performance to let consumers discover that earphones deliver the emotions and excitement comparable with a concert.

Realistic and predictive simulations by means of a fully coupled multiphysical electrical-mechanical-acoustical simulation model are the heart and driving backbone of M-voiD® technology. The major advantage of M-voiD® is that acoustic problems can be identified and resolved in the virtual domain before any prototype is being built.

Sound characteristics are virtually measurable and assessable and can be optimized on the virtual model. It is not just limited to the graphical reproduction. M-voiD® listens to the virtual sound of the earphone already on the computer by means of a special reproduction technique (called auralization), enabling improved sound. Bottom line, while even the largest companies out there can test 100 or maybe 10,000 prototypes to check and improve the sound quality before releasing the final product, we had the ability to test sound quality from over 10 million prototypes.

Besides that, Konzept-X also helped us with the driver design itself to maximize the results after we’ve changed the internal design.

Axum: The Future of Wireless Audio 3

CGM: With your Indigogo doing so well, do you foresee this will delay the final release?

IG: Exactly the opposite. We planned to wait until the funding period is over to head into mass production, but now that we understand the demand we’ll start doing it ASAP.

CGM: Why the choice to go with Indigogo over an option such as Kickstarter?

IG: We thought about KS, however the Indiegogo team was much more supportive and offered lots of relevant information on how to succeed with crowdfunding . We are product people and don’t understand crowdfunding, so a supportive team was something very important for us.

CGM: Do you plan to offer a retail version of these headphones?

IG: Of course, but first we’ll ship everything to our backers and then we’ll think about retail.

CGM: For the gamer on the go, will these offer anything beyond what is already in the wild?

IG: The perfect fit of Axum earbuds is something like you’ve never experienced before, you can see the bulky design of other brands such as Samsung and Motorola The last thing you want to do is wear those gigantic things all day long.

Axum: The Future of Wireless Audio 4

CGM: How do you think these headphones will do with the fitness crowd beyond just the music listener?

IG: We believe that beside the sound quality, the fit and comfort is something they’ll be addicted to. We noticed the reaction of the people while testing them out in the gym and we guarantee that once you try Axum earbuds you’ll never be able to use wires again!

CGM: Are there any obstacles you will need to overcome to bring these to market?

IG: Yes, there are many obstacles of unawareness from the customers. Many people are not familiar with this concept and think of it as a regular mono Bluetooth ear piece, so we are heading to a long journey of explaining our product and turning it into mainstream.

Axum: The Future of Wireless Audio 5

CGM: How do you feel these headphones will do with a crowded market? What sets Axum apart?

IG: We have full confidence in our product. First of all we know 100% that no matter how good your BT earbuds are, if they are not True Wireless they can’t compete with us. As for other True Wireless companies out there, based on their design they’ve never thought about athletes as their potential customers and it’s a shame as this concept is perfect for fitness and exercising. So we already have a huge advantage on them.

Sony Announces AI Assistant Earpiece to Go on Sale in November – See more at: http://aibusiness.org/sony-announces-ai-assistant-earpiece-to-go-on-sale-in-november/#sthash.nm99apky.dpuf

Smart earpieces are the next frontier for the smart generation, we have all seen the earpiece that can translate instantly But that is just the start, as we can see from this article about this Xperia Ear wireless earpiece, it updates you from your phone when you put it in your ear. It won’t be long before we won’t need a smart phone everything will be in our ear.

Sony has revealed its ‘smart personal assistant’ that include a bluetooth earpiece will go on sale in November.

At the IFA show in Berlin today, the firm confirmed it will launch this November ‘starting in select markets,’ although its price has still not been revealed.

The Xperia Ear wireless earpiece can update you with any missed calls or messages as soon as you slot it into your ear.

The firm also showed off a Xperia Agent, a robot measuring just over one foot tall, that also works as a PA.

‘It will navigate you to where you want to go and make your life eye-free and hands-free,’ said Sony Mobile’s President and boss, Hiroki Totoki of the ‘her’ earpiece when it was unveiled at the MWC show earlier in the year.

‘It is also powered by Sony’s voice technology and will respond to a number of commands.’

The firm says the smart earpiece ‘is a next-generation wireless ear-piece that brings a new way of communicating, without compromising on enjoying the world around you.’

It reads users information such as your schedule, weather and the latest news to keep you up-to-date on the go.

Powered by Sony’s voice technology, it responds to verbal commands, so you can ask it to make a call, perform an internet search, dictate a message or navigate to a certain location.

It connects to an Android smartphone via NFC or Bluetooth and talks to a host application, where you can customise settings, including the info you need when you first connect in the morning, touch commands and app notifications.

‘Its lightweight and comfortable soft silicone ear-bud is built for continuous wear, with IPX2 water-protection and all-day battery life3,’ Sony said.

It’s available in Graphite Black and the innovative case doubles as a charger, so you can simply pop it in when you need to recharge.

It also unveiled the Xperia Eye, a wearable camera that acts as your personal sidekick, capturing everyday life moments with a 360 degree wide-angle lens.

Unveiled at Mobile World Congress (MWC) in Barcelona, the Xperia Eye can be attached to clothing or worn around the neck.

It forms part of a suite of connected gadgets designed to free people up from their phones.

Sony said the Xperia Eye is ‘a vision for a personalised assistant’ and joins three other smart gadgets that are connected to a Sony smartphone that acts as a hub, feeding information to them such as notifications.

These are Xperia Agent, Xperia Project and Xperia Ear.

Xperia Agent is a security camera-style device which acts as a home monitoring system, keeping an eye on what’s going on around it and projecting notifications fed to it from a Sony smartphone onto surfaces around it.

‘It will provide you with useful information, communication assistance and home appliance controls,’ Sony said.

Xperia Project projects an interactive interface onto any clear surface, meaning you can manipulate images, webpages and screens you would usually find on your smartphone, onto a hard surface.

Sony claims this projected image will respond to touch, voice and gestures just as someone would interact with your smartphone screen.

The Xperia Ear is a wireless earpiece that will update you with any missed calls or messages as soon as you slot it into your ear.

‘It will navigate you to where you want to go and make your life eye-free and hands-free,’ said Sony Mobile’s President and boss, Hiroki Totoki.

‘It is also powered by Sony’s voice technology and will respond to a number of commands.’

The wearable camera is the first time Sony has shrunk its image sensing and camera technology into such a small device.

5 Examples of Earpiece to Hear Far Away

1. Using a Mobile Phone And Bluetooth headsets or Earpiece

To do this, you simply need to go into your mobile phone’s settings and then change answering mode to Auto; this enables your phone to answer automatically when you ring it. Most mobile phones only work in the Auto answer mode, after you have plugged in the headset.

After turning on the Bluetooth headset, make sure it’s properly paired with your cell phone, and confirm the battery has adequate charge. Hide your Bluetooth headset somewhere you know it’ll pick up the sounds clearly, however, make sure that it’s well hidden.

Leave the room, however, do not go very far. The Bluetooth connection will work through the walls, but if you happen to go far away, it’ll not work very well (the range can be up to about 30 feet or 3 rooms away). Now test your cell phone by calling it to see how far you can actually go and still get to hear the bugged room through the Bluetooth headset.

You can wait for the conversations to get to the interesting part, and then turn on voice recorder on the cell phone; it should be able to record via the microphone of your Bluetooth headset.

2. Using a Two Way Radio and Earpiece

Two way radios allow users to communicate when they’re far away such that they can not hear each other. These devices use radio frequencies instead of cell phone towers which means they will work in areas where there’s no cell phone coverage or reception.

The two way radios offer instantaneous communication; users simply need to press the Push-To-Talk (also known as PTT) key, and they can instantly talk and convey their particular message to the other party. This is due to the quick call setup time that’s entrenched in this technology. The ability to offer quick communications is one of the reasons why most organizations prefer the two way radios for their tactical and operational communications.

Another great feature of the two way radios, is the ability to facilitate one to many (also known as, group calls) communications effectively. This basically means that a single user can conveniently communicate with 2, 10, 20, and more, of other two way radio users at the same time. In short, there is no need for you to repeat time and time again when you want to communicate with many people and using a two way radio earpiece, this communication is much more secure

3. Ear Spy Application

Ear Spy App is a great eavesdropping tool. Depending on just how good your cell phone is, this app can become a very high powered listening tool. Ear Spy application can route the audio from your cell phone’s mic right to to your headset letting you eavesdrop on the people around you whilst remaining inconspicuous. When using a Bluetooth, you can use this app to spy from a room nearby; you simply need to leave your cell phone near the target, and then use your Bluetooth headset to eavesdrop. If you want to fine tune the incoming signals, you can use the graphics audio equalizer. Whether you wish to eavesdrop on particular conversations or you just want to play some spy games, Ear Spy application will be of great help in your endeavor. You should know that this app requires you to use headphones, otherwise you will get poor audio feedback.

4. Spy Glasses

This spy device comprises of an in built Bluetooth transmitter which looks like ordinary glasses, a microphone and a wireless earpiece. Connections between the glasses, the earpiece and your cell phone are wireless, thus totally unnoticeable to other people; the device’s ultra compact design basically ensures nobody will know it is a spy tool. Spy glasses are compatible with almost any mobile phone which has the Bluetooth option. Actually, the Spy glasses are universally compatible with all the standard Bluetooth enabled equipment including computers. Some of the features of this device include; excellent transmission and reception of audio signals, built in microphone, and a large capacity Lithium battery.

5. Micro Air Vehicles (MAVs)

Modern technological advances are ever increasing human’s potential for developing tiny things. As for the United States Air Force, this translates to revolutionary designs in the air vehicles to provide the war fighters with new tools which can enhance both the situational awareness, and also the capacity of engaging quickly, accurately, and with minimal collateral damage. This is where Micro Air Vehicles (also known as MAVs) come in. The term MAV or micro air vehicle, refers to the a new type of advanced remotely controlled aircraft (abbreviated as, UAV) that’s significantly much smaller than other similar aircraft. Typically, MAVs can easily blend in with the surrounding environment, stay in air for a long period of time, and can go places which can’t be reached safely by humans, or most of the other types surveillance equipment.

The target dimensions for MAVs is approximately 6 inches (15 centimeters), and the development of actual insect sized aircrafts is expected in near future. As a matter of fact, various efforts in the research on micro air vehicles have involved attempting to mimic flying insects so as to achieve the flight capabilities which aren’t attainable through the use of other means of aerial propulsion. In the year 2007, a bug like Micro air vehicle model with a wingspan of 3 cm was revealed at a robotic’s conference; in the year 2008, the United States Air Force released a video showing Micro air vehicles which were the size of a bumblebee; and in the year 2012, some engineers from Johns Hopkins University started studying flight of butterflies to discover how airborne robots can mimic their maneuvers.

The potential military use is 1 of the key driving factors, although the micro air vehicle can also be used commercially, as well as in scientific and mapping applications. The main military use envisioned for the micro air vehicle is gathering of intelligence via the use of microphones, cameras, or other types of sensor.

Conclusion

Some of the above points are illegal, and you should not do any of them. Also, do not use any of the above methods to record any intimate relations; the legal consequences of doing so are very severe. Finally, keep in mind that it’s illegal in the US to make recordings of people without their consent/permission; and depending on what you’ll do with the recordings, you might find yourself in big trouble.

Where You Can Get a Walkie Talkie Headset

Walkie talkies are widely used in almost any setting where the portable radio communication is necessary, including but not limited to; loud environments, in forests, in airports, when hunting, in airports, hiking and other outdoor recreation, among others. The units come in handy in situations where many people need to listen, and only 1 needs to talk at a go, for instance, when giving instructions to workers on a camping site. In other words, Walkie talkies are a great communication tools to have, regardless of whether you’re using them for fun, at home, or at work, to help in facilitating things to run smoothly. That being so, they have one major limitation, and that’s the fact that they’re hand held devices which you’ve to carry with you at all times, and handle whenever you want to communicate. If both of your hands are full, then that can be very inconvenient. Fortunately however, today, there lots of accessories you can use, such as the Walkie talkie headset, which frees up your hands, thus allowing you to talk or communicate with much ease. Moreover nothing helps enhance the audio quality of the Walkie Talkie more than the headset.

To use the headset, you simply need to plug it into the Walkie talkie, and then you can leave the unit clipped onto your belt. The headset will allow you to not only hear clearly, but it also helps in cancelling out noise from your surroundings or environment. The boom mic of the headset allows you to talk directly into the Walkie talkie without having to hold the device up near your mouth.

Radio Connector Types

Walkie talkies don’t use the same types of connectors for attaching the speakers, earpiece/microphones or headsets. Today, there are many different connector types available on the market. Even different Walkie talkie models from the same company might have different connector types. Actually, just because 2 different radios have a same physical connection socket, doesn’t always mean that they’re internally wired up the same way; this means that you should never assume that having the same socket means similar accessories will work in both Walkie talkies. So always be careful when choosing the connectors for your radios.

Active vs Passive

The Active Walkie talkie headsets normally manage the ambient sound that’s around it, and send a similar frequency to unwanted sounds to cancel it out; this increases the sounds to noise ratio of unwanted sounds, eventually cancelling the noise out. The Passive Walkie talkie headsets rely on the insulated or the sound absorbent material to muffle the sounds; this is a cheaper option which only protect ups to a certain decibel level.

Conclusion

Today, there is a wide range of walkie talkie headsets to choose from. Your choice should depend on your particular needs, however, you should also make sure you choose one which will work great in your particular ambiance. If you are looking to buy a Walkie talkie headset, contact Headsetonline.co.uk today, and we will gladly provide you with the perfect unit geared to meet each and every one of your needs.

Motorola Solutions announces new mobile radio, enhancements to its P25 platform

Motorola Solutions are busy re-modelling their business at the moment and are under pressure from many other radio manufacturers, that are stealing away their market share. They are moving towards creating equipment that can use the LTE, essentially competing with the mobile phone market. This will be seen by many as a move away from the essence of two way radios, but it is an inevitable progression. This new radio will use current motorola accessories, chargers and batteries. We brought you this article from the urgentcomms websites

Motorola Solutions today will unveil a new P25 mobile radio that operates on its ASTRO 25 systems and will highlight key features enabled by the 7.17 release of ASTRO 25 software today at APCO 2016.

One of the key features of the APX 8500 all-band mobile radio is its ability to leverage LTE connectivity from a VML750 modem installed in the public-safety vehicle, if the ASTRO 25 data capability is interrupted by continuous voice transmissions during a busy incident, according to Anatoly Delm, Motorola Solutions’ director of global infrastructure marketing.

“Let’s say that you have a major incident, everybody’s talking all the time and the ASTRO network is being used all the time, it can [offload] some of the data communications, like GPS, to broadband—public-safety LTE or commercial LTE, depending on what the modem is operating on,” Delm said during an interview with IWCE’s Urgent Communications.

“So, you’ve got this combination of the best of both worlds, where your voice communications are continuing over the ASTRO network, and your data communications—if the ASTRO network is too busy, because of a major incident—can be carried on by an LTE network from the same car.”

Meanwhile, the 7.17 release of ASTRO 25 software will provide system users and operators with features that are designed to improve the reliability and usability of the P25 network, Delm said.

One enhancement is a more efficient way to execute over-the-air software updates, Delm said.

“Ordinarily, what happens is that the software update has to travel to one radio at a time. If you’ve got a large enough fleet, it could take days or possibly weeks [to complete the software update for all radios],” he said. “In this case, the software is being continuously broadcast, kind of like on repeat. In the meantime, all of the radios continue to function as normal—you can talk on them, and none of the functions are disrupted.

“Once a radio has received all of the packets that it needs, it can then give the user the [a notification] that the update is ready and asks whether the user wants to install it. If they say ‘Yes,’ then the radio is updated. This means you can reduce your update time to maybe a few hours, depending on the size of your fleet. But you certainly don’t have to do it one at a time.”

Other new capabilities included in the latest ASTRO 25 software release include personnel accountability—often used for roll-call functionality on a fireground or other incident scene—over trunked systems, Delm said. Previously, this capability existed only in conventional mode.

London Gatwick Airport deploys new radio system from Motorola Solutions

Back in the day, around 2006, the Heathrow and Gatwick radio systems were the envy of many, many businesses, a cutting-edge Motorola analogue trunking system with individual and group setup, that could broadcast messages out across the site or talk to individual radios, something that is taken for granted these days with our digital systems. The Gatwick system has been upgraded and been given the digital touch.

US-based Motorola Solutions, along with its authorised channel partner Servicom, has debuted its new digital mobile radio (DMR) system, Mototrbo Capacity Max, at London Gatwick Airport.

Designed to provide enhanced voice and data communications, the newly installed system connects 1,300 people in the airport’s airside and groundside teams.

Mototrbo Capacity Max will also double the capacity of Gatwick’s current analogue network.

Various applications, such as TRBOnet PLUS and iBeacon, were given along with Mototrbo Capacity Max to improve its data performance.

TRBOnet PLUS is a dispatcher application that allows voice recording, mapping and event logging in the control room, while the iBeacon indoor positioning application sends alerts to individual radios based on location.

Gatwick Airport IT project manager Simon Telling said: “We chose Motorola Solutions’ Mototrbo Capacity Max system not only for how resilient and secure it is, but because of the flexibility it offers us now and into the future.

“We have experienced significant growth over the past decade and we are now approaching the limits of our previous analogue system.

“Migrating to scalable, digital communications will double our capacity and bring new capabilities that will help us improve efficiency and safety for staff, retail partners and passengers across the airport.”

The new Motorola solution will also enable Gatwick’s central controllers to send off the closest employee to an incident, saving time.

The airport recorded more than 4.6 million in passenger traffic in July.

Source – http://www.airport-technology.com/news/newslondon-gatwick-airport-deploys-new-radio-system-from-motorola-solutions-5021249